G-Matrix
Get the appBook a walkthrough
Structural engineering workspace

Design the building.
Verify the steel.
Deliver the package.

GMatrix-7 connects building geometry, loading, frame configuration, 3D review, licensed MATRIX analysis and material outputs in one disciplined workflow.

Book a product walkthrough Explore the workspace
01
Model
02
Analyze
03
Review
04
Deliver
Clear span / portal frame Model live
A clear-span steel building transitioning from an engineering wireframe into a completed structural model
20.00 m clear width9 baysA–E crane aisle
Metal building systemsLight gauge steelOpen web steel joistsIBC · AISI · SJI
One continuous model

Inputs become engineering evidence.

Every step reads the same building state. Frame geometry defines the available aisles, the 3D model follows the same topology, and the analysis handoff opens the staged model in the installed licensed MATRIX application.

  1. 01 / DEFINE

    Set the building basis

    Codes, geometry, bays, secondary steel, loads, sheeting and materials stay organized by engineering task.

    Structured inputs
  2. 02 / CONFIGURE

    Add real project conditions

    Configure a crane runway, mezzanine plan areas and building accessories against the actual frame topology.

    Topology-aware
  3. 03 / ANALYZE

    Run licensed MATRIX

    The current BIM is staged, the installed licensed application is detected, and results are collected back into the workspace.

    Visible handoff
  4. 04 / DELIVER

    Review and export

    Inspect ratios, deflections, reactions, members, material quantities and pricing without rebuilding the model.

    Traceable output
The G-Matrix workspace

A calmer way to manage a complicated building.

Use the same workspace for precise inputs and spatial review. Select a view below.

G-Matrix crane input screen showing one clear-span A–E aisle
Inputs stay constrained by the model. Clear Span exposes one aisle, A–E, and the crane bridge spans the complete clear width.
Three structural systems

Purpose-built modules.
One engineering language.

GMatrix-7 supports the practical systems used across industrial and commercial steel construction, with a shared focus on repeatable design and useful outputs.

MBS

Metal Building Systems

Clear-span, interior-column and multi-gable buildings with primary frames, bracing, purlins, girts, crane and mezzanine inputs.

  • Portal-frame geometry
  • IBC design basis
  • Live 3D verification
  • Material and pricing outputs
LGS

Light Gauge Steel

Cold-formed member workflows aligned with AISI practice and the wider building definition.

  • Z and C sections
  • Purlin and girt design
  • Section checks
OWSJ

Open Web Steel Joists

Joist design and detailing outputs aligned with SJI practice for repeatable production work.

  • Component design
  • Deflection review
  • BOM-ready results
Designed for review

See where the model came from, and where it is going.

The BIM remains readable, units can switch between metric and imperial, and validation identifies exactly which input needs attention before a run.

View installation options
standard-building.bim
Building Width          20
Gable Type             RF
Bay Spacing            6.67 7@6.67 6.67

STARTCRANE
A---E 1 1 10 20 5.5 5 8 0.5 42 2.5 3 Full 10 20 10
ENDCRANE

STARTMEZZ
1 2 3 3 0 4 1.5
ENDMEZZ
Talk to the product team

Bring one of your buildings.

We will walk through the workflow using the building types, design practices and deliverables that matter to your team.

Email Dr. SimonSimon@g-matrix-7.comReplies are typically sent within one business day.